Click here for frequently asked questions about Stove Pipe

Galvanized 6 inch Single Wall Duct Pipe

Please note: Galvanized Pipe is for HVAC Systems not Wood Stoves
Single Wall Duct Pipe is ideal for installations where there is a minimum 18" clearance from the stove until it enters the chimney. This line is economical, high quailty stove pipe ideal for basic installations. Please note: All of the Galvanized 6 inch Single Wall Duct Pipe on this page is 28 gauge.

28-Gauge
Straight Pipe is entirely self-locking. No tools needed to close seams
18" clearance to combustibles

Order Item

Item	Size	Item #	Price	Weight	Buy
24" Straight Pipe	6" X 24"	C8547218	$9.99	1.5 lbs
90 Degree Elbow	6"	C8549313	$10.49	1.5 lbs
Adjustable Elbow	6"	C8549578	$7.49	1.5 lbs
Increaser	From 6" to 7" pipe	Orh612G	$12.99	1.5 lbs

Description of available pieces
Straight Pipe is entirely self-locking. No tools needed to close seams. Put together by simply inserting tongue on one edge and pressing together until it snaps. Joint can be cut to any length without destroying the lock.
90 degree Elbow - Corrugated lock seamed, one piece construction. Lock seamed for strength and to prevent coming apart. 2 1/2" ends
Adjustable Elbow - Can quickly be adjusted to a straight line, 45 degree angle, or a right angle.
Increaser - Easily adapts smaller stove pipe to larger stove pipe. Large end of Increaser is crimped.

Frequently asked questions about Stove Pipe

1. How do I determine what size stove pipe I need?
2. What's the difference between single wall and double wall stove pipe?
3. Should stove pipe be installed with the male end up or down?

Please note: For safety considerations and ease of installation follow these guidelines.
1. Never mix and match gauges of stove pipe.
2. Use a stove pipe reducer or increaser if you are working with different sizes of pipe.
3. Buy all of the pipe you need from one brand. The connection will most likely differ from Brand X to Brand Y.
4. While all of the stove pipe we sell will fit together tightly a very secure connection can be obtained by using 3 screws per connection. Screws also make the entire assembly stronger.
5. New stove pipe may smoke a little and emit an odor when first used. This is normal and nothing to be concerned about. It is simply the paint on the pipe curing a bit. If necessary open a window or door to allow the smoke and fumes to escape.
Return to top of page